https://www.blackcotaco.com/blogyoutube daily 0.75 2023-08-19 https://www.blackcotaco.com/blogyoutube/blackcotaco monthly 0.5 2022-08-07 https://www.blackcotaco.com/blogyoutube/pelican-bx90r-gas-strut-install monthly 0.5 2022-08-16 https://images.squarespace-cdn.com/content/v1/62e7089c066fa3730dc9797d/029a39ef-1d9b-4045-8d67-42c2205ca156/pelican-cargo-bx90r-roof-case.jpeg Blog + YouTube - Pelican BX90R Gas Strut Install - Pelican BX90R Interior: 32.4 × 15.0 × 8.8" Exterior: 36.6 × 20.0 × 11.5" MSRP: $369.95 https://images.squarespace-cdn.com/content/v1/62e7089c066fa3730dc9797d/84216322-1b83-41ad-b2ff-d8f11bc56753/20210903_075537.jpg Blog + YouTube - Pelican BX90R Gas Strut Install - Make it stand out Installed cases on the Tacoma https://www.blackcotaco.com/blogyoutube/better-than-goose-gear-seat-delete monthly 0.5 2023-02-04 https://images.squarespace-cdn.com/content/v1/62e7089c066fa3730dc9797d/dfe7b920-8132-491d-963c-05d2a746a350/drings.png Blog + YouTube - Better Than Goose Gear Seat Delete - Add D-rings Add the d-rings to the four corners by using one of the longer screws (Screw + lock washer + washer + d-ring mount) to the frame. https://images.squarespace-cdn.com/content/v1/62e7089c066fa3730dc9797d/895af060-5b2c-448e-a9a3-2511f870098e/grid+for+top.png Blog + YouTube - Better Than Goose Gear Seat Delete - Create a layout grid for drilling On the bottom side of the plate (the side you did not bevel the edges) create a grid pattern for marking the centerline and drill points for the bolts to connect the T-nut, bolts for attaching the top plate to the frame, and the d-ring mounts. Take your time and mark out all of the spots that will be drilled. https://images.squarespace-cdn.com/content/v1/62e7089c066fa3730dc9797d/0dc498b5-7c76-4783-8bb7-fec2f0e09fda/thumbnail.png Blog + YouTube - Better Than Goose Gear Seat Delete - Make it stand out Whatever it is, the way you tell your story online can make all the difference. https://images.squarespace-cdn.com/content/v1/62e7089c066fa3730dc9797d/13e15a29-0633-42d6-b0b1-d8bf94c5ee1f/floor+upright.png Blog + YouTube - Better Than Goose Gear Seat Delete - Assemble Support Legs Take your time with this when assembling as each truck will vary slightly. Add the leg supports by loosely fitting the remaining two 10 1/4in and 17in extrusions to make a squaty “H” that will be connected to the top frame as shown in the picture. This should be done on the opposite side that you drilled through the top frame. Take the loosely assembled frame to the truck and attach the top frame to the rear seat factory frame so that the top plate is level in the truck. Push the legs as close to the bottom seat assembly on the rear floor of the cab till they cannot move any further towards the seat and ate perfectly 90 degrees (or close enough) where you can tighten down the leg supports onto the main frame. https://images.squarespace-cdn.com/content/v1/62e7089c066fa3730dc9797d/e2e567c2-91f2-489e-89f7-c63439ba96b2/layout+frame.png Blog + YouTube - Better Than Goose Gear Seat Delete - Layout the Frame The first step in the process is to lay out the frame for the top to sit on. For this, we will use the 30in and the 17in extrusions. Layout the 30in extrusions on the outside and the four 17in extrusions on the inside as shown to the left. Try and evenly space out the bars as they will impact where you drill your holes for the top plate assembly. Once you are happy with the layout add all of your 1/4-20 tnuts into the groves on the frame. Remember that it’s not just the nuts for the frame assembly but the support leg and the top plate & d-rings you need. If you forget this step you will be disassembling the frame. https://images.squarespace-cdn.com/content/v1/62e7089c066fa3730dc9797d/9e98a4c5-1cc4-43a4-a539-459c5745ca77/assembly+breakdown.png Blog + YouTube - Better Than Goose Gear Seat Delete - Install Diagram This will hopefully make sense as per how to attach the seat delete to the rear seat mounts. The black in the diagram to the left represents the factor seat mounts. Bring the seat delete assembled frame into the truck and rest the side without the support legs on top of these factor seat mounts. Using the 2in 1/4-20 hex bolts (purple) assemble the bolt, 1/4in lock washer (grey), and 1/4in washer (yellow) together. Line up the holes that are drilled in the seat delete frame and feed the bolt through the hole all the way up to the t-nut (blue) that is attached to the top plate on the seat delete. Screw in till tight. Attache the leg support cross bar using the factory seat hardware to the frame of the truck. https://images.squarespace-cdn.com/content/v1/62e7089c066fa3730dc9797d/d5a30ce6-4981-4c80-86c4-663f7d97e4fb/cut+top.png Blog + YouTube - Better Than Goose Gear Seat Delete - Cut the top plate Using the 2ft x 4ft MDF 1/2in sheet measure your frame width and length to cut the top plate out. For this specific build, the top plate is 19in x 30 1/4in. Double check your measurements of your top even if you are rebuilding this exact seat delete. Be sure to wear a mask and safety goggles when cutting MDF. https://images.squarespace-cdn.com/content/v1/62e7089c066fa3730dc9797d/4a8415b3-2c0c-4ab8-b8a3-b58823a48b59/assemble+frame.png Blog + YouTube - Better Than Goose Gear Seat Delete - Assemble the Frame Assemble the frame using the 90-degree profile connectors at each corner of the frame as shown. For the assembly on the shore sides, remember to space the frame so that the plastic end caps sit flush with the end crossbar. See the video for an example of this. Add the plastic end caps with the provided plastic pressure peg. Top assembly is complete https://images.squarespace-cdn.com/content/v1/62e7089c066fa3730dc9797d/63b8e671-a806-49ec-8c02-1b7f617e1a95/cross+bar.png Blog + YouTube - Better Than Goose Gear Seat Delete - Leg Support Cross Bar This is the trickiest part of the build. Once you have the frame and support legs locked in, measure the distance from the support leg to the location where the lower factory seat bolts into the truck frame. Then bend the 1/4in aluminum flat bar to make up the distance between the seat delete support legs and the truck. I used a 35deg angle on each bend. I would recommend 90 deg for each so you can get 2 bolts in whereas I only was able to get 1. You can use the bench vise or a metal break to bend this aluminum easily. Once it is bent cut the bar to size and locate where to drill a 1/2in hole for each of the factory bolts to connect the seat delete to the frame. attach with the normal economy tnut slot hardware as shown in the image. https://images.squarespace-cdn.com/content/v1/62e7089c066fa3730dc9797d/19755ce4-2d03-412f-914f-710e5419de74/drill+holes.png Blog + YouTube - Better Than Goose Gear Seat Delete - Drill & Recess Once you have the grid laid out in the above step start drilling with a smaller bit first on the bottom side of the plate where your grid is. You can freehand this but I highly recommend a portable drill guide to get that perfect hole through the plate. Once all of the pilot holes are drilled flip the board so that the top beveled side is facing up and your grid is facing down. On all of the pilot holes, except for the holes that are used to mount the d-rings, use the 3/4in forstner bit to drill a recess for the T-nuts and the bolt assembly to indent the top plate so the bolts sit flush. For the t-nuts, you will go down about 1/16th of an inch. Use a bolt assembly (Bolt + Lock washer + washer) to estimate the depth of the other holes. They are roughly 5/16in deep. After all of the recesses are made flip the board back over and drill the pilot holes with the 1/4in drill bit all the way through. You may want to try and dry assemble the platform and top at this time to see if you need to widen the 1/4in holes to make assembly easier. If everything fits, disassemble the top from the frame and paint with a bed liner spray. I recommend leaving the t-nuts in when spraying. just cover the threads if you do so. Reattach the frame to the top once dried. https://images.squarespace-cdn.com/content/v1/62e7089c066fa3730dc9797d/cd166bfa-88f7-4518-b658-cda120153069/rout+edges.png Blog + YouTube - Better Than Goose Gear Seat Delete - Rout the top edges This step can be optional but is recommended. On one side of the MDF, route all four edges with a gentle bevel to take the edge off. This will be the very top that the fridge sits on and will help prevent and damage to the top plate or your hands when moving items in and out of the truck. Again, don’t forget to wear a mask and safety goggles. https://images.squarespace-cdn.com/content/v1/62e7089c066fa3730dc9797d/2804dc89-c2e3-473c-ab5e-15f1640b5cb7/drill+out+tnut.png Blog + YouTube - Better Than Goose Gear Seat Delete - Drill Through Hole for Tnut This is the hole that will connect the seat mounts to the seat delete frame. For the 3rd Gen Tacoma this is roughly 1 1/2in in from the end of the extrusion including the end cap for measuring. Use a 1/4in drill bit after punching the hole in the channel of the extrusion and drill through the extrusion completely. Be sure to wear eye protection while drilling as aluminum like to chip when its drilled. Drill an identical hole on the opposite side of the frame using the same measurements. https://www.blackcotaco.com/blogyoutube/89f2h5rmqsha1mh96rdhh7phuk0v3g monthly 0.5 2023-02-27 https://www.blackcotaco.com/blogyoutube/tag/Goose+Gear monthly 0.5 https://www.blackcotaco.com/blogyoutube/tag/3rd+Gen monthly 0.5 https://www.blackcotaco.com/blogyoutube/tag/Solar monthly 0.5 https://www.blackcotaco.com/blogyoutube/tag/Refrigerator monthly 0.5 https://www.blackcotaco.com/blogyoutube/tag/Review monthly 0.5 https://www.blackcotaco.com/blogyoutube/tag/Seat+Delete monthly 0.5 https://www.blackcotaco.com/blogyoutube/tag/Tacoma monthly 0.5 https://www.blackcotaco.com/blogyoutube/tag/Overland monthly 0.5 https://www.blackcotaco.com/blogyoutube/tag/Overlanding monthly 0.5 https://www.blackcotaco.com/blogyoutube/tag/Toyota monthly 0.5 https://www.blackcotaco.com/blogyoutube/tag/DIY monthly 0.5 https://www.blackcotaco.com/blogyoutube/tag/Cascadia+4x4 monthly 0.5 https://www.blackcotaco.com/blogyoutube/tag/Charge+Controller monthly 0.5 https://www.blackcotaco.com/blogyoutube/tag/Battery+Management monthly 0.5 https://www.blackcotaco.com/blogyoutube/tag/Camping monthly 0.5 https://www.blackcotaco.com/blogyoutube/tag/Install monthly 0.5 https://www.blackcotaco.com/build daily 0.75 2022-08-18 https://images.squarespace-cdn.com/content/v1/62e7089c066fa3730dc9797d/43bac894-3216-4761-b731-0b3e8b38fc0f/20220806_142753.jpg Build Dobinsons MRR Front Suspension https://images.squarespace-cdn.com/content/v1/62e7089c066fa3730dc9797d/e1960c20-fcd5-493c-907a-79fa04d8c7d2/20220806_144420.jpg Build Extreme LED 38” Slim Amber/White Light Bar https://images.squarespace-cdn.com/content/v1/62e7089c066fa3730dc9797d/591067d5-ba88-4532-be6c-6f1a2b0070c1/20220806_145852.jpg Build RCI 1/4” Aluminum Full Skid & Catalytic Gaurd https://images.squarespace-cdn.com/content/v1/62e7089c066fa3730dc9797d/a41a5d4d-707f-4ec2-b777-7425b85e25eb/20200105_142450.jpg Build https://images.squarespace-cdn.com/content/v1/62e7089c066fa3730dc9797d/4a2ad9e1-0195-4a5a-a041-69acf93dfe36/20220806_143812.jpg Build https://images.squarespace-cdn.com/content/v1/62e7089c066fa3730dc9797d/3f80c77e-b24c-450d-ad41-5019437304fa/20220806_142813.jpg Build Extreme LED 30” Single Row Combo Beam https://images.squarespace-cdn.com/content/v1/62e7089c066fa3730dc9797d/f6d7f84f-1982-42d9-8b58-01ba16999432/20200118_103226.jpg Build Toyota Proshop TRD Pro Grill https://images.squarespace-cdn.com/content/v1/62e7089c066fa3730dc9797d/697d9b0b-f614-426c-8cb1-39d339418f53/20210529_080323.jpg Build Full Coms Setup https://images.squarespace-cdn.com/content/v1/62e7089c066fa3730dc9797d/ed177a4e-859b-40d1-bcf7-35cbfd3fde78/20220806_142802.jpg Build Specialty Products Company Upper Control Arm https://images.squarespace-cdn.com/content/v1/62e7089c066fa3730dc9797d/0aee62e1-aefd-403c-ae77-c68d8132e513/20200701_194325.jpg Build Rigid Industries D-Series Pro Flood Beam LED Ditch Lights https://images.squarespace-cdn.com/content/v1/62e7089c066fa3730dc9797d/1313e5d3-8bf1-4641-a7ed-c54330f7b453/20200701_183713.jpg Build iKamper Mini 2.0 Delivery Day https://images.squarespace-cdn.com/content/v1/62e7089c066fa3730dc9797d/2d5f840d-a75c-4668-8315-998b0ccaa224/20210820_201809.jpg Build Injen Evolution Cold Air Intake https://images.squarespace-cdn.com/content/v1/62e7089c066fa3730dc9797d/6b3cc6cf-a9da-49d1-b62b-5ba16fce6108/20220806_142843.jpg Build Baja Designs Squadron SAE Wide Cornering LED Fog Lights https://images.squarespace-cdn.com/content/v1/62e7089c066fa3730dc9797d/ff846b94-6dca-4f95-ab1b-11da05e949d0/20201015_122557.jpg Build iKamper Mini Installed on Bedrack https://images.squarespace-cdn.com/content/v1/62e7089c066fa3730dc9797d/69e0cd84-dce0-4e97-a15b-16c4ca925e2a/20220806_142545.jpg Build RRW - RR7-H & BF Goodrich All-Terrain KO2 Tires https://images.squarespace-cdn.com/content/v1/62e7089c066fa3730dc9797d/5497ca01-6e98-4b47-88bb-0c5fd01d7729/20220806_144139.jpg Build Baja Designs Rock Light LED (White) https://images.squarespace-cdn.com/content/v1/62e7089c066fa3730dc9797d/ffee5bf2-19a7-40fa-a1eb-c75b40451e95/20201015_122603.jpg Build Detail of Truss Bed Rack and iKamper Mount https://images.squarespace-cdn.com/content/v1/62e7089c066fa3730dc9797d/e9dce9d8-3746-4713-9852-003135c54c09/20220806_143642.jpg Build Off-Grid Engineering Dual Battery Split System & SDHQ Built Billet Main Battery Terminals https://images.squarespace-cdn.com/content/v1/62e7089c066fa3730dc9797d/d33ab358-3475-41ef-a501-ed5c3ee7ea49/20220806_144032.jpg Build Baja Designs S2 Sport Pair Driving Combo LED Amber Chase Lights https://images.squarespace-cdn.com/content/v1/62e7089c066fa3730dc9797d/b22fb10c-8120-49f9-81a1-f1347a6740b9/20201015_122615.jpg Build iKamper Mounting Hardware https://images.squarespace-cdn.com/content/v1/62e7089c066fa3730dc9797d/33a8d7ed-2b70-464e-92d3-470e3eb09465/20220806_143703.jpg Build Full Throttle Group 35 AGM Battery https://images.squarespace-cdn.com/content/v1/62e7089c066fa3730dc9797d/dd7f6c6f-c2e0-4f31-847e-e3379309cfcb/20220806_144037.jpg Build Generic Amazon 3rd Break light w/Turn Signals LED https://images.squarespace-cdn.com/content/v1/62e7089c066fa3730dc9797d/84666305-6175-43cd-adde-148014dab445/20201015_122622.jpg Build Uptop Overland Truss Bed Rack Side Mounting Plate https://images.squarespace-cdn.com/content/v1/62e7089c066fa3730dc9797d/ad3676e5-2303-43cc-9f8a-8413c25b823b/20220806_145206.jpg Build AJT Design Black Steering Wheel Emblem Overlay https://images.squarespace-cdn.com/content/v1/62e7089c066fa3730dc9797d/afc020cf-3046-433f-ae63-ca193ea8c219/20220619_144923.jpg Build Cascadia 4x4 BMS https://images.squarespace-cdn.com/content/v1/62e7089c066fa3730dc9797d/3a50f289-d3b7-45d5-a592-4e2d4a1a8a11/20220806_144108.jpg Build Rear Light Setup https://images.squarespace-cdn.com/content/v1/62e7089c066fa3730dc9797d/92cf4652-858f-4cda-bf05-96493e7a86fd/20201104_091354.jpg Build Rago Fabrication Ditch Light GMRS Antenna Mount https://images.squarespace-cdn.com/content/v1/62e7089c066fa3730dc9797d/4af1ff3a-59cd-40fa-b7e0-3b4ba70c30f1/20220806_145129.jpg Build Meso Customs Blackout Handles https://images.squarespace-cdn.com/content/v1/62e7089c066fa3730dc9797d/19011fcc-20f6-4852-8214-65f1b9d9207b/20220806_142855.jpg Build Cascadia 4x4 Hood 85W Solar Pannel https://images.squarespace-cdn.com/content/v1/62e7089c066fa3730dc9797d/b62cbfb5-54d8-4899-8f4b-3ebab04c212c/20220806_144657.jpg Build R4T Sequential Turn Signals https://images.squarespace-cdn.com/content/v1/62e7089c066fa3730dc9797d/1637759c-6e33-4a4b-bbd2-10c9b69bbd8d/20210228_123706.jpg Build iKamper Winter Storage https://images.squarespace-cdn.com/content/v1/62e7089c066fa3730dc9797d/4c702727-5aae-4a44-9598-f5cf2d94fb00/20220806_145137.jpg Build Cali Raised Off Road Toyota Tacoma Switch Pro Mounting Panel https://images.squarespace-cdn.com/content/v1/62e7089c066fa3730dc9797d/7be3aad7-1d7f-44eb-9882-4063c543f02b/20220619_144951.jpg Build Cascadia 4x4 Hood Solar Panel https://images.squarespace-cdn.com/content/v1/62e7089c066fa3730dc9797d/d09afacc-e80a-436c-ac6e-1cef4fc555cd/20220806_144722.jpg Build Meso Customs V2 Dual Color Map Lights - White https://images.squarespace-cdn.com/content/v1/62e7089c066fa3730dc9797d/08fc3c81-0c84-4a14-b7f3-bd81f2498d60/20210326_175354.jpg Build Uptop Overland Alpha Roof Rack Handel Detail Aerial View https://images.squarespace-cdn.com/content/v1/62e7089c066fa3730dc9797d/a891aaf4-057f-4d8d-8e49-182acaff6a52/20220619_144928.jpg Build Cascadia 4x4 Solar Wiring https://images.squarespace-cdn.com/content/v1/62e7089c066fa3730dc9797d/520d7ea3-4bc7-4140-b226-fdcd4f5983ac/20220806_144734.jpg Build Meso Customs V2 Dual Color Map Lights - Red https://images.squarespace-cdn.com/content/v1/62e7089c066fa3730dc9797d/a9651694-a2a2-484a-912d-43d63a923759/20210326_175359.jpg Build Uptop Overland Alpha Roof Rack Handel Detail Front View https://images.squarespace-cdn.com/content/v1/62e7089c066fa3730dc9797d/c6627e19-4bba-4d9d-a1a2-dce7550c9e99/20220806_145226.jpg Build Custom 3d Printed Escort Mute Button Under Mount https://images.squarespace-cdn.com/content/v1/62e7089c066fa3730dc9797d/fa0d3057-2b3e-431e-8543-928d341f9b59/20210925_174630.jpg Build ARB Dual Twin Air Compressor https://images.squarespace-cdn.com/content/v1/62e7089c066fa3730dc9797d/3152856f-aed2-4eb0-8ece-26ec15455104/20220806_144857.jpg Build Meso Customs V2 Dual Color Map Lights https://images.squarespace-cdn.com/content/v1/62e7089c066fa3730dc9797d/c7fea52c-feea-4559-867d-66cec401b44c/20210808_123622.jpg Build Custom 80/20 Rail Mount for WaterPort & Propane Tank https://images.squarespace-cdn.com/content/v1/62e7089c066fa3730dc9797d/b28be742-f881-4638-91af-5958b100eb62/20220806_145232.jpg Build Custom Magnet Mic Mount For GMRS Handheld w/Magnet Mic Mount https://images.squarespace-cdn.com/content/v1/62e7089c066fa3730dc9797d/49410c9a-46bb-4762-be9d-4e02fcd85707/20220806_144016.jpg Build ARB Dual Twin Air Compressor & Expedition Essentials Bed Side Mount https://images.squarespace-cdn.com/content/v1/62e7089c066fa3730dc9797d/f699d1dd-4a57-48ff-b854-12ef08323637/20220806_144813.jpg Build Meso Customs V2 Dual Color Ultimate Dome Light - White https://images.squarespace-cdn.com/content/v1/62e7089c066fa3730dc9797d/8f4d9521-aca7-41d1-b923-6806568bc16a/20210809_080854.jpg Build Retrax ProXR Aluminum Bed Cover https://images.squarespace-cdn.com/content/v1/62e7089c066fa3730dc9797d/573ec68d-9f49-4285-a4ca-b128b1890e49/20220806_145239.jpg Build Lower Panel Button Configuration https://images.squarespace-cdn.com/content/v1/62e7089c066fa3730dc9797d/9c3ccbdc-5a20-4e3f-b93c-b248d365137e/20210925_171654.jpg Build Expedition Essentials Bed Side Compressor Mount https://images.squarespace-cdn.com/content/v1/62e7089c066fa3730dc9797d/40302b26-20c9-4e62-a5ca-6e9c1f798ba1/20220806_144818.jpg Build Meso Customs V2 Dual Color Ultimate Dome Light - Red https://images.squarespace-cdn.com/content/v1/62e7089c066fa3730dc9797d/58793a15-89a9-4d9c-a622-d264b6fc987e/20210809_080902.jpg Build Power Tank BKT Propane Mount & Ignik 5lbs. Propane Tank https://images.squarespace-cdn.com/content/v1/62e7089c066fa3730dc9797d/7cde0945-d12e-4917-9cc4-1f18016c4c93/20220806_145246.jpg Build Custom 3D Printed Cat5 port for Comms https://images.squarespace-cdn.com/content/v1/62e7089c066fa3730dc9797d/f004208f-d271-479f-a813-e903dc20f803/20210925_174626.jpg Build Expedition Essentials Bed Side Compressor Mount https://images.squarespace-cdn.com/content/v1/62e7089c066fa3730dc9797d/c3847c00-3580-4102-8244-c91db553b67e/20220806_144844.jpg Build Meso Customs V2 Dual Color Ultimate Dome Light https://images.squarespace-cdn.com/content/v1/62e7089c066fa3730dc9797d/572271cd-0439-4371-9a42-9079e7c7f192/20210809_081006.jpg Build WaterPort Weekender Water Tank https://images.squarespace-cdn.com/content/v1/62e7089c066fa3730dc9797d/1d9ca192-3120-428d-8944-6c8b6b7ca28e/20220806_145324.jpg Build Expedition Essentials 3TPAM https://images.squarespace-cdn.com/content/v1/62e7089c066fa3730dc9797d/8928fc0e-7c6c-43c9-8fd3-d5f3df0a2fb3/20220806_145403.jpg Build Expedition Essentials 3TPAM https://images.squarespace-cdn.com/content/v1/62e7089c066fa3730dc9797d/83c71494-c0f6-439b-898c-ff2002d3222c/20210818_193215.jpg Build C4 Hybrid Front Bumper Preinstall https://images.squarespace-cdn.com/content/v1/62e7089c066fa3730dc9797d/e11cdccc-06dc-41b7-bd29-7727fd4ea02a/20220806_145332.jpg Build Custom 3D Printed Charging Phone Mounts https://images.squarespace-cdn.com/content/v1/62e7089c066fa3730dc9797d/91eeb350-dabb-4135-8734-66db51d59891/20210823_180605.jpg Build Runnin4Tacos Bumper Covers installed https://images.squarespace-cdn.com/content/v1/62e7089c066fa3730dc9797d/94502984-63f9-4cf6-8457-a92a6d80c707/20220806_145422.jpg Build Meso Customs Chrome Delete Kit https://images.squarespace-cdn.com/content/v1/62e7089c066fa3730dc9797d/38090e7b-00df-4999-8fb3-7fe5a76bac44/20220806_145348.jpg Build Custom 3D Printed Inreach Mini Mount https://images.squarespace-cdn.com/content/v1/62e7089c066fa3730dc9797d/08e9c981-65dc-41c6-a125-d2c4724c33b6/20220806_143959.jpg Build Custom Rear Bumper Airline https://images.squarespace-cdn.com/content/v1/62e7089c066fa3730dc9797d/d8fc8fc5-2877-4144-bbd6-8e60ce8bcb57/20210825_180530.jpg Build C4 Hybrid Front Bumper Installed https://images.squarespace-cdn.com/content/v1/62e7089c066fa3730dc9797d/32121647-c832-4af2-bcc0-0a8ef038d591/20220806_145355.jpg Build Custom 3D Printed Inreach Mini Mount Top View https://images.squarespace-cdn.com/content/v1/62e7089c066fa3730dc9797d/dbb5ba01-2729-4ed8-88a4-3a51f78e1a82/20220806_144051.jpg Build Cali Raised Off-Road Bed Stiffeners https://images.squarespace-cdn.com/content/v1/62e7089c066fa3730dc9797d/3fa17fd2-7ab4-436b-aea0-0f3d34c30443/20210825_210153.jpg Build C4 Hybrid Front Bumper Final Installation https://images.squarespace-cdn.com/content/v1/62e7089c066fa3730dc9797d/c4a880a4-03b9-4bae-928e-4962b1f7deec/20210903_075450.jpg Build iKamper Mini Skycamp 2.0 Opened https://images.squarespace-cdn.com/content/v1/62e7089c066fa3730dc9797d/4ca1c95a-39d3-4b5a-87be-c5d6a3d10df0/20210903_075540.jpg Build Pelican BX90R Cargo Boxes https://images.squarespace-cdn.com/content/v1/62e7089c066fa3730dc9797d/d9f3e15b-33ad-4250-834d-76850bda4f75/20220806_145434.jpg Build Rago Fabrication Center Console Modular Storage Panel with Bridge https://images.squarespace-cdn.com/content/v1/62e7089c066fa3730dc9797d/40a3a3e5-649c-475d-bb71-0f651c34414f/20210903_075550.jpg Build Pelican RFMT2 Cargo Case Roof Mount Kit https://images.squarespace-cdn.com/content/v1/62e7089c066fa3730dc9797d/fd24e3c1-6ade-4bb1-9736-7bb3e55aa7d0/20220806_145459.jpg Build Vehicle OCD Glovebox Organizer https://images.squarespace-cdn.com/content/v1/62e7089c066fa3730dc9797d/0e232e1f-bdde-47e9-a9cc-555d3c14af9a/20220503_155610.jpg Build RCI 1/4” Aluminum Front Skid Plate Pre Paint https://images.squarespace-cdn.com/content/v1/62e7089c066fa3730dc9797d/9a9c1b1a-c2aa-45a8-977d-1cee389a5207/20220806_145515.jpg Build Custom 3D Printed Mount for Dual Battery Switch https://images.squarespace-cdn.com/content/v1/62e7089c066fa3730dc9797d/cc12ccc5-c03e-4e4d-bb0f-f65174f3d8b2/20220806_142849.jpg Build Meso Customs Headlight Trim Plates https://images.squarespace-cdn.com/content/v1/62e7089c066fa3730dc9797d/c55a55cf-5ce0-493b-9d81-4bc34c344989/20220806_145526.jpg Build Meso Customs Chrome Delete Kit Shifter Trim https://images.squarespace-cdn.com/content/v1/62e7089c066fa3730dc9797d/bad80070-ca7e-4b7d-abe5-c8294ab8d78e/20220806_143755.jpg Build Rhino-Rack Sunseeker 2.5M Awning https://images.squarespace-cdn.com/content/v1/62e7089c066fa3730dc9797d/1d7ac07f-22e2-4019-81a7-d88e9eece6b3/20220806_145612.jpg Build Vehicle OCD Center Console Tray https://images.squarespace-cdn.com/content/v1/62e7089c066fa3730dc9797d/c9220c00-83b3-4cee-be9c-0deafd990700/20220806_143802.jpg Build RCI 20 Degree Short Bed Rock Sliders w/Kickout https://images.squarespace-cdn.com/content/v1/62e7089c066fa3730dc9797d/e8c02ca2-ebce-4e9c-87d5-652a586aefdf/20220806_145626.jpg Build Vehicle OCD Center Console Organizer https://images.squarespace-cdn.com/content/v1/62e7089c066fa3730dc9797d/7638c658-0493-4f1e-9cc6-d89ca9a4dc2f/20220806_144043.jpg Build R1 Industries Quick Release Fire Extinguisher Mount https://images.squarespace-cdn.com/content/v1/62e7089c066fa3730dc9797d/cf69c3c7-5e2f-4607-8aba-68a05821ab8d/20220806_145711.jpg Build Meso Customs Coin Tray https://images.squarespace-cdn.com/content/v1/62e7089c066fa3730dc9797d/e7a92a99-cdaf-4d4a-a30d-226569c5c5e6/20220806_145729.jpg Build Shapeways Overhead Center Switch Panel https://images.squarespace-cdn.com/content/v1/62e7089c066fa3730dc9797d/abf83ea6-2d42-4349-bbbe-8fb8cda6bebc/20220806_145736.jpg Build Shapeways Overhead Passenger Switch Pane https://www.blackcotaco.com/home daily 1.0 2023-02-11 https://images.squarespace-cdn.com/content/v1/62e7089c066fa3730dc9797d/2ce2b3a5-a66f-4306-bbc3-d55625f45288/20210707_190840.jpg https://images.squarespace-cdn.com/content/v1/62e7089c066fa3730dc9797d/b53af406-4d31-4c4c-9c09-f3b8a43dcd58/20201206_080344.jpg https://images.squarespace-cdn.com/content/v1/62e7089c066fa3730dc9797d/05c66582-6e7b-4f08-a17b-2c3e43dc53c6/F04CC6D8-.jpg